Ide Cards Products
-
Startech 35baycf2ide compact flash card to ide adapter with 3.5" bay enclosure
- 34.99Type: Compact Flash Card to IDE Specifications: This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards. Features: Allows Compact flash card to be used as bootable storage Can be mounted in the front or rear panel of your case, to fit into any 3.5"bay or available expansion slot Easily swap cards in and out with built-in push button ejector Easy to use jumpers offer simple master/slave drive
-
Shuttle sx58h7 barebone
- 619.99The ideal home for an Intel Core i7 processor, Shuttle's SX58H7 breaks new ground in performance. The main board houses an Intel X58 Express chipset and is ready to work with the latest Intel Core i7 processors. Up to 16GB of DDR3 memory can be installed with Triple channel support. A pair of high-speed PCI-Express x16 expansion cards can be installed to handle any graphic challenge as well as displays on four monitors. User-friendly overclocking allows advanced users to adjust the frequency and voltage of the CPU and RAM for additional performance while the Shuttle Integrated Vapor Chamber base with Heat Pipe Technology to keep the processor operating at safe temperatures.. Three drives – an external 5.25" and two internal 3.5" units – can be mounted. A dual Gigabit LAN controller supports teaming mode. Experience top-end audio performance with the Realtek ALC888 8-channel HD audio. All of this is powered by an uncompromising 500 Watt 80 PLUS BRONZE certified mini ATX PSU, and you can secure your system with fingerprint recognition. CPU Type: Intel Core i7 South Bridge: ICH10R Memory slot: 4 x 240Pin Memory Type Supported: DDR3 1066/1333/1600(OC) Max Memory Supported: 16GB PCI Express: 2 x PCI Express x16 IDE ATA: 1 x ATA 133 Serial ATA: 3 x SATA 3.0Gb/s
-
Gwc ad3300 serial ata to ide converter (serial ata port to ide device)
- 12.99Type: SATA to IDE Specifications: The serial ATA to IDE converter allows standard parallel ATA hard disk drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc, to be used with serial ATA PCI cards or motherboards with serial ATA port and meet the specification of Serial ATA 1.0 interface. Features: Compliance with Serial ATA Gen 1.0. Master/slave device emulation support. Support PIO mode 0~4. Support Ultra DMA mode 0~7. Support UDMA data transfer rates of up to 150MBps Support ATAPI Packet command set. Support 48-bit LBA addressing. Support additional ATA command for serial ATA SCR access. Serial ATA power save Package Contents: Serial ATA to IDE Converter SATA Cable User's Manual Parts: 1 year limited
-
Sans digital st-san-cs1t compact flash cf to 2.5� sata enclosure
- 29.99Drive: IDE CF Card Supporting DMA External I/O: SATA Dimensions: 3.9" x 2.8" x 0.4" Weight: 0.5 lbs. Features: Supports a single Compact Flash cards. Same size and connectors as 2.5" SATA hard drive, providing an easy mirroring upgrade to exisiting laptop and Industrial PC computer systems. Solid State Disk benefit using Compact Flash cards. Lower power consumption. Minimized heat generation. Shock prevention. Noiseless operation.
-
Sans digital cr2t compact flash cf to 2.5" sata spanning / mirroring enclosure
- 49.99Type: Enclosure Specifications: Form Factor 2.5" Hard Drive Size and Connectors RAID Level RAID 1 (Mirroring) or Spanning Maximum Capacity 32GB CF card x 2 Host Interface SATA Drive Interface IDE CF Card Supporting UDMA Dimensions : 3.9" (W) x 2.8" (D) x 0.37" (H) Weight : 0.42 lbs. Features: Houses up to two Compact Flash cards. Supports mirroring with auto rebuild and spanning. Same dimensions and connectors as 2.5" SATA hard drive, providing an easy mirroring upgrade to exisiting laptop and Industrial PC computer systems. Solid State Disk benefit using Compact Flash cards. Lower power consumption. Minimized heat generation.
-
Siig scpe4b12s4 pci ide controller card
- 42.99When adding additional IDE devices beyond your motherboard's capacity SIIG's SCPE4B122S4 HD controller is a brilliant choice. Two IDE connectors mean four additional devices can be added, including CD-Roms, ZIP drives, and hard drives. This card will auto-detect the device and fine tune its settings for ultimate performance. Further enhancing its performance is the independent 256 byte FIFOs per channel to improve the efficiency of data being read and written from the drives. Not limited by the 137GB barrier that hampers many HD controller cards, this card can handle high capacity devices, and with CRC error-checking you can be assured of flawless data transfers. Built in on-board flash BIOS extends the life of the card by allowing future upgrades. You work hard for your money, put it to good use with this highly economical yet highly effective HD controller. Internal Connectors: 2 x ATA 133 Transfer Rate: up to 133MB/sec Operating Systems Supported: Windows 98SE/ME/NT4.0/2000/XP/ Features: RoHS compliant Compliant with specification, revision 2.2 Compliant with ATA/ATAPI-6 Specifications Compliant with UDMA6 ATA/133 Specifications Supports PCI 33 MHz with 32-bit data Full backward support for Ultra ATA/100/66/33 standards On-board flash BIOS for future upgrade Supports Ultra DMA (0-6) and Multi-word DMA mode (0-2), and PIO mode (0-4) CRC error-checking
-
Ridata supreme series 4gb compact flash (cf) flash card
- 34.25Speed: Dual Channel SLC 300X Features: The Ritek 300x Compact Flash Cards support high-end CF 4.0 complaint. Conforms to CF Type I standard. RuRun in 3 basic modes: 1) PC Card I/O Mode, 2) PC Card Memory Mode (CF Mode), and 3) True IDE Mode. Low Power conConsumption. Multi-platform compatibility RoHS compliant.
-
Ridata supreme series 8gb compact flash (cf) flash card
- 78.99Speed: Dual Channel SLC 300X Features: The Ritek 300x Compact Flash Cards support high-end CF 4.0 complaint. Conforms to CF Type I standard. RuRun in 3 basic modes: 1) PC Card I/O Mode, 2) PC Card Memory Mode (CF Mode), and 3) True IDE Mode. Low Power conConsumption. Multi-platform compatibility RoHS compliant.
-
5.25 male x 2 to 6 pin pci-e internal power supply cable, 8 inch
- 3.59Cable supplies your internal devices with power from the power supply unit. Connector: IDE Power connector (Molex) 5.25 inch x 2 to one 6 pin PCI-E power connector. Length: 8 inch / 0.66 feet. Use with PCI Express (PCI-E) add on cards, such as video graphic cards, network adapter cards, etc
-
Msi p45 neo3-fr desktop board - intel - socket t - 1333mhz, 1066mhz, 800mhz fsb - 16gb - ddr2 sdram - ddr2-800/pc2-6400, ddr2-667/pc2-5300 - atx
- 95.48Supports Intel Core 2 Extreme/Core 2 Quad/Core 2 Duo based processors in LGA775 package. Supports Intel Yorkfield, Wolfdale in the LGA775 package. Supports FSB 1600 overclock/1333/1066/800 MHz : The MSI Live Update online is designed to automatically download and update the BIOS and driver when there's a new version online. It helps reduce the risk of getting the wrong file and minimize the trouble of searching the files from MSI website. Live Update 3 is a single utility software that automatically checks BIOS, driver and utility updates and installs for you, which can save your time for searching and lower the risk while updating : Key components status hardware monitor monitor the Dual Core CPU each unit status. Auto speed up with system loading change : Supports four unbuffered DIMM of 1.8 Volt DDR2 667/800/1066 SDRAM, 16GB Max (To support 16GB max, please check the criteria at Intel website) : Slots - One PCI Express x16 slot (PCI Express Bus SPEC V2.0 compliant); One PCI Express x1 slot. (support PCI Express Bus specification v1.0a compliant); Four 32-bit v2.3 master PCI bus slots; Support 3.3v/5v PCI bus interface : On-Board IDE / SATA - One Ultra DMA 66/100/133 IDE controller integrated in JMicron 363; Supports PIO, Bus Master operation modes; Can connect up to 2 Ultra ATA drives; SATA-II controller integrated in ICH10R/JMicron 363 chipset for up to 3Gb/s transfer speed - Supports six SATAII ports by ICH10R : 4 x USB 2.0 connectors ? 1 x Floppy disk drive connector ? 8 x Serial ATAII connectors ? 1 x ATA133 connector ? 1 x SPDIF-Out connector ? Clear CMOS Jumper ? 2 x H/W OC connector ? 1 x TPM module connector ? 1 x PS/2 keyboard ? 1 x PS/2 mouse ? 1 Parallel port ? 1 x Serial port ? 1 x 6 in 1 audio jack ? 4 x USB 2.0 ports ? 1 x RJ45 LAN jack : The mainboard BIOS provides Plug & Play BIOS which detects the peripheral devices and expansion cards of the board automatically. : The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications. : 9 Mounting holes : Dimensions - 12in.(L) x 9.6in. (W) ATX Form Factor : For use in ATX compatible desktop tower chassis
-
Startech.com ide to cf adapter card with a pci bracket - microdrive, compactflash type i, compactflash type ii - ide/eide
- 22.99This Compact Flash to IDE adapter connects to any standard 40 pin or 44 pin IDE connection on a desktop computer, allowing a Compact Flash card to be used as bootable storage in place of an IDE hard drive! A Do-it-yourself SSD solution, the CF to IDE adapter can be powered by a 4-pin floppy connector or through a 44-pin IDE port, and can be mounted to the computer rear panel using the included PCI bracket - allowing Compact Flash, Compact Flash 2, or IBM MicroDrive media to be inserted into the CF slot. The adapter function is completely transparent to the operating system, and jumper settings are provided allowing you to designate the installed MicroDrive or CF cards to act as a Master or Slave drive.
-
Startech.com 2.5 ide to dual compact flash (cf) adapter card - microdrive, compactflash type i, compactflash type ii - ide/eide
- 22.99This 2.5in IDE to Dual Compact Flash SSD Adapter Card allows you to convert one or two Compact Flash (CF type I/II) cards or MicroDrives into a bootable IDE Solid State Drive - a simple and convenient way to replace a 2.5in IDE hard disk drive. The IDE to Dual CF adapter card makes it easy to build your own do-it-yourself SSD (requires CF card or Micro Drive), allowing you to take advantage of the benefits that Solid State storage has to offer. With no moving parts, a SSD is the ideal addition to virtually any working environment, because it provides cooler and quieter storage than a conventional hard disk drive. Plus, Solid State drives are less susceptible to atmospheric hazards (e.g. dust particles, atmospheric changes etc.), ensuring seamless performance regardless of environmental factors. A highly reliable storage solution, the IDE to Compact Flash SSD Adapter Card is backed by StarTech.com''s Lifetime Warranty and free, lifetime technical support.
-
Cables to go ultra ata133 eide cable - 1 x idc female - 2 x idc female - 36 - green
- 13.5GO!MOD Molded Round Ultra ATA133 Cables from Cables To Go deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO!MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females. Devices Supported: 2. Cable Type: Type-B. Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
-
Cables to go 50049 36in go!mod molded round 1-device ultra ata133 eide cable - uv reactive blue
- 13.9GO!MOD Molded Round Ultra ATA133 Cables from Cables To Go deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to 80-wire/40-pin IDC Female. Devices Supported: 1. Cable Type: Type-B. Connector Layout: Blue connector: System; Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
-
Cables to go ultra ata133 eide cable - 1 x idc female ide - 1 x idc female ide - 18 - green
- 12.67GO!MOD Molded Round Ultra ATA133 Cables from Cables To Go deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to 80-wire/40-pin IDC Female. Devices Supported: 1. Cable Type: Type-B. Connector Layout: Blue connector: System; Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
-
Cables to go go!mod round ultra ata133 eide cable - 1 x idc female ide - 1 x idc female ide - 24 - black
- 5.99GO!MOD Molded Round Ultra ATA133 Cables from Cables To Go deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to 80-wire/40-pin IDC Female. Devices Supported: 1. Cable Type: Type-B. Connector Layout: Blue connector: System; Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
-
Cables to go go!mod round ultra ata133 eide cable - 1 x idc female - 2 x idc female - 18 - orange
- 12.31Improve airflow in your case while adding a touch of style!GO!MOD Round Ultra ATA133 Cable from Cables To Go delivers the performance you demand from your new UDMA IDE drives. This Round Cable minimizes clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Adds style and pizzazz to any case!
-
Ideq330p barebone system (socket 939, 2gb ddr max, 3 bays, 300w)
- 99.99Biostar IDEQ 330P Small Form Factor Barebones System General Features: Small Form Factor Barebones System NFORCE4 chipset Socket 939 motherboard Supports up to 2 GB DDR400 memory Can physically accommodate up to 3 IDE drives Ultra DMA 33/66/100/133 Bus Master Mode Two (2) on-board SATA connectors RAID 0, 1 Audio: Realtek ALC850 7.1-Channel Audio LAN: NVIDIA Gigabit MAC + VITESSE Gigabit PHY IEEE 1394 FireWire: VIA VT6307 Includes 300 Watt Active PFC Power Supply Built-in Memory Card Readers Supported Memory Cards: CompactFlash Secure Digital Memory Stick SmartMedia xD Picture Card Motherboard Expansion slots: One (1) PCI Express x16 slot One (1) PCI slot One (1) Mini PCI slot Two (2) DDR400 DIMM sockets Drive Bays: One (1) 5.25-inch external drive bay Two (2) 3.5-inch internal drive bays Front I/O ports: Two (2) USB 2.0 ports One (1) S/PDIF input One (1) IEEE 1394 FireWire port Headphone in Microphone in Rear I/O ports: Two (2) PS/2 ports Four (4) USB 2.0 ports Two (2) 9-pin Serial ports One (1) IEEE 1394 FireWire port 7.1 channels audio output RJ-45 Ethernet port Supported Processors: Socket 939 AMD Athlon 64 FX, Athlon 64 x2 (dual core), Athlon 64 and Sempron processors Dimensions: 7.5 x 8.5 x 13.25-inches (H x W x D, approximate) Regulatory Approvals: FCC CE C-Tick cULus Listed TUV
-
Cables to go eide data cable - 1 x ids female - 2 x ids female - 18 - gray, black
- 6.24Get the performance you expect from your new UDMA IDE drives, plus minimal clutter, a clean looking cables and increased air flow by using Molded Round Ultra ATA133 Cables from Cables To Go. The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. And these cables reduce over-heating and saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used.
-
Startech.com 44-pin ide flash card reader - microdrive, compactflash type i, compactflash type ii - ide/eide
- 21.24All-in-one onboard solution takes care of conversion. No software/drivers or cables requiredConvert your CF for use as a SSD (solid state drive)On-board LED to show drive statusUse your Compact Flash cards to act as the primary bootable deviceWith no moving parts, provides a silent operation that is resilient to environmental factors while reducing overall power consumption
Pricetronic.com is your online shop where to compare prices and get great deals for electronics, cameras, DVD’s, cell phones, games and more products available for costumers.
Copyright © 2009 Pricetronic.com All Rights Reserved • Privacy Policy • Terms Of Use • About us